Start by setting your full drawer interior workspace, then build bins inside it. Place bins in the grid, tune each one in 3D, and get an instant layout quote.
1 grid unit = 42 mm. Interior footprint: 252 mm × 252 mm. Click the dimension label to type an exact measurement.
Base plate style
Full floor panel in every grid cell.
6W × 6D · 252 mm × 252 mm
All presets fit on a Bambu Lab X1C build plate (252 × 252 mm).
Utensils drawer
3 full-depth bins side by side — ideal for spatulas, spoons, and cutlery. Prints in one go on the X1C.
6W × 5D · 3 bins
Electronics drawer
Two divided component trays up top, wide cable tray below. 6×6 footprint (252×252 mm).
6W × 6D · 3 bins
Workshop drawer
Three deep tool bins up front, a 3-section fastener tray behind. PETG for durability. 6×6 footprint.
6W × 6D · 4 bins
Maker's desk
Pen holders, a narrow divider column, and open supply bins — all in a 6×6 footprint.
6W × 6D · 6 bins
Hardware sorter
12 individual 1×1 cells for nuts/bolts, two grouped trays, three open bins. 6×6 footprint.
6W × 6D · 17 bins
Junk drawer rescue
Three small bins up front, two medium in the middle, one long bin at the back. 6×6 footprint.
6W × 6D · 6 bins
